![Raul Romo SD](/img/default-banner.jpg)
- 170
- 4 158 411
Raul Romo SD
United States
Приєднався 15 сер 2006
I have been tinting vehicles, home and offices for 29 years. I also work in the car audio field. i also work part time on cars, small repairs, some electronic repairs,etc. I love to make how to videos in my spare time to help out do it your selfer's. I have been around cars for over 35 years and love to work on them. I have a small window tinting and car audio business in San Diego California. I own, manage and work mostly by myself and have been doing so for 29years.
2000 Nissan Frontier remove upper plenum, injectors, valve cover gaskets, knock sensor part 1of 3
part 1of 3 2000 Nissan Frontier V6 3.3L. I take off the upper plenum, fuel rail, fuel injectors, remove and replace valve cover gaskets (clean the valve covers and paint them), remove lower intake, replace knock sensor
Переглядів: 19
Відео
2000 Nissan Frontier how to remove upper plenum, replace injectors & valve cover gaskets part 2 of 3
Переглядів 74 години тому
part 2 of 3 I reinstall wiring spare plug wire and, upper plenum,
2000 Nissan Frontier how to remove upper plenum, injectors, replace valve cover gaskets, part 3 of 3
Переглядів 164 години тому
part 3 of 3 2000 Nissan frontier 3.3L finishing up what's left to hook up, fill radiator and bleed coolant system
August 12, 2024
Переглядів 2921 день тому
How to call forward you Verizon One Talk Yealink to your cellphone or otger number.
Bose AV3 2 1 Remote works but doesn't turn on Receiver Easy Fix !!!
Переглядів 532 місяці тому
I show how to open up this Bose AV3-2-1 receiver dvd all in one surround system. the unit works, the remote was previously working and then all of a sudden the remote would not control the unit. would not power up or anything, even if the unit was turned on manually. I don't show this, but I replaced batteries on remote and was about to open it up, ( and I remembered that you can check the infr...
how to replace the positive battery post terminal on a toyota corolla 2011
Переглядів 3452 місяці тому
I show how to replace the positive battery terminal on a 2011 Toyota corolla S. I ended up buy the part on Amazon for about $8 instead of $35 at the Toyota Dealership. here is the link to amazon www.amazon.com/dp/B0BYMWLBPH?ref=ppx_yo2ov_dt_b_product_details&th=1
2011 Toyota Corolla intermittent misfire while in gear & stopped a/c on No check engine light Solved
Переглядів 623 місяці тому
I go through various procedures to find the intermittent misfire that is causing bucking or jolting of the vehicle while in gear but not while driving. also worse with a/c on. this happened all of a sudden on my 2011 Toyota corolla s. turned out to be a faulty coil pack that was intermittent. I show how to clean out throttle body, mass air flow sensor, scan vehicle and finally solve the issue
How to remove door panels on a 2023 Nissan Sentra
Переглядів 7033 місяці тому
I show how to remove and reinstall front and rear door panels on a 2023 Nissan Sentra
how to replace emergency brake handle on a 1994 Mercedes SL600
Переглядів 2374 місяці тому
how to replace emergency brake handle on a 1994 Mercedes SL600
How to replace the trunk shocks on a 1994 Mercedes SL600
Переглядів 314 місяці тому
I explain how to replace the trunk shocks on a 1994 Mercedes SL600
how to remove 3rd brake light on a 2021 BMW 228i
Переглядів 2194 місяці тому
I show how to remove and reinstall 3rd brake light on a 2021 BMW 228i sedan.
how to replace gear shifter bulb on a 2011 toyota corolla
Переглядів 6964 місяці тому
I show to replace the gear shifter bulb on a 2011 Toyota corolla. it uses Philips bulb 74LLB2 (2pc) 14v $1.85 (like original), also cciyu halogen white T5 (10pc)12V $6.78, or Ajxn T5 LED bulb error free (10 pc) 12v$5.99. all can be found on Amazon.
How to remove door panels and windows sweeps on a 2023 Tesla Model 3
Переглядів 3295 місяців тому
I show how to remove the front and rear door panel on a 2023 Tesla Model 3, as well as show how to remove the Lower Window Sweeps.
How to remove rear window wiper arm on a 2023 chevy bolt EUV
Переглядів 4615 місяців тому
I show how to remove rear window wiper arm on a 2023 chevy bolt EUV
How to remove door panels on a 2023 chevy bolt EUV
Переглядів 1 тис.5 місяців тому
I show how to remove the front and rear door panels and lower window sweeps/channels on a 2023 Chevy Bolt EUV
How to replace oxygen sensor bank 2 sensor 1 2000 Ford Ranger Code P0153 oxygen circuit low response
Переглядів 2,1 тис.6 місяців тому
How to replace oxygen sensor bank 2 sensor 1 2000 Ford Ranger Code P0153 oxygen circuit low response
How to install a bluetooth radio on a 2016 Ford Transit 150 base model
Переглядів 2 тис.6 місяців тому
How to install a bluetooth radio on a 2016 Ford Transit 150 base model
How to replace control arms, sway bar links, lower ball joints. outer tie rods on a 2005 Volvo S60
Переглядів 2639 місяців тому
How to replace control arms, sway bar links, lower ball joints. outer tie rods on a 2005 Volvo S60
how to replace door check strap stopper 2009 2013 toyota corolla
Переглядів 4,3 тис.11 місяців тому
how to replace door check strap stopper 2009 2013 toyota corolla
how to remove window sweeps and door panels on a 2014 Mercedes CLA250
Переглядів 91511 місяців тому
how to remove window sweeps and door panels on a 2014 Mercedes CLA250
how to install a screen, retrain backup camera & steering wheel controls on a 2016-2017 Honda Civic
Переглядів 316Рік тому
how to install a screen, retrain backup camera & steering wheel controls on a 2016-2017 Honda Civic
how to remove lower window sweeps on a 2023 Inifiniti QX60
Переглядів 245Рік тому
how to remove lower window sweeps on a 2023 Inifiniti QX60
how to remove the window sweeps on a 2023 Rivian RS1
Переглядів 988Рік тому
how to remove the window sweeps on a 2023 Rivian RS1
how to fix door molding on a 2005 volvo s60
Переглядів 95Рік тому
how to fix door molding on a 2005 volvo s60
How to remove front door panels on a 2023 Ford Mustang Mach E
Переглядів 2,6 тис.Рік тому
How to remove front door panels on a 2023 Ford Mustang Mach E
How to remove head rests on a 2007 Mercedes S500 S550 Mayback
Переглядів 7 тис.Рік тому
How to remove head rests on a 2007 Mercedes S500 S550 Mayback
How to tint a rear window on a Honda Civic
Переглядів 2,2 тис.Рік тому
How to tint a rear window on a Honda Civic
How to remove front door panels 2023 Hyundai Genesis GV60
Переглядів 1,1 тис.Рік тому
How to remove front door panels 2023 Hyundai Genesis GV60
How to remove front door panels on a 2022 Ford Mustang
Переглядів 5 тис.Рік тому
How to remove front door panels on a 2022 Ford Mustang
I have a 2007 Honda Accord Sedan EX-L. Bought it used. The guy I bought it from had only 1 key. After a year, the battery died. I continued to use the key to enter and start the car just fine. I eventually took it apart to get a new battery. and used (just the key) the side without the chip...to enter and start the car. So the RFID/Microchip wasn't needed. Idk if it's just my car, but I wonder of anyone has ever tried it. Honda wants like $300, online an "unprogrammed" one cost $85...with then you need to bring it o Honda or a locksmith. The locksmith told me $110 if I needed it duplicated if I didn't have a "blank" replacement key. I told him I just wanted a laser cut part of the key. After insisting I don't need it programed he told me $40 for just the laser cut. I think the older version of cars that still have an actual key, some may not need that "chip".
@@chrismccabe1795 most of those hondas with factory thief need a programmed key from 2003-2007, but it might be the V6 version, not the 4 cylinder
@@raiderman28 I have a V-Tech V6. I wonder if anyone has actually tried without the chip, just like I had done. My car key has a chip. I left it home and drove to get a new battery (several miles away from chip) And it is not needed (on my car at least) regardless of what Honda or 2 locksmiths that I went to said. Maybe it's possible a fuse for that system went and therefore made the chip null and void? I also notice the 1 key was not an original Honda key as they have their logos on them. I didn't realized that until I watched your video. Also the guy I bought the car from put a rubber Honda logo cover over it. Maybe if someone disconnects the alarm system you can override the chip function?
@@chrismccabe1795 its basically a resistance ring on the ignition. In some cases if the vehicle has or had remote start, they install a bypass module, and a extra key ( old version) , but nit sure if they have come out with anything else, since i had stopped installing remote starts years ago.
@@chrismccabe1795 if yours doesn’t have it, then it probably doesn’t have a theft light on the dash either???
@@chrismccabe1795 the rubber piece from honda is just a protective cover.
Thank you your explanation is good
I am always suspicious when the Door cover is not reinstalled in these videos to demonstrate that the spacer wasn't too much.
@@phant0m0 😂 don’t be suspicious. My videos are intended to help anyone that needs it. I have a business in car audio and window tinting. I try to make videos of my experiences to guide anyone needing it. I can’t always record them, because these are customers cars, and don’t alway have the luxury of time. I usually try to record something that i would normally not find easy to work on, so someone will have a less harder time. The good lord blessed me with these hands to help share my knowledge, not just keep it for myself. Helping those around you will come back 10 fold. 🙏🙏. I don’t always have time to show the panel going back on, and it sometimes seems to obvious and easy for someone to do there own. But since then in my videos, i have tried to record panels going back on, as requested by my followers
@raiderman28 So Will the panel go back on? I am find My fosgate R152S 5-1/4 no spacer still touches the door panel. That 1/2" spacer is suspect to me and with a larger speaker.
@@phant0m0 this is only for the front doors. You can’t just add a spacer on just any vehicle. These spacers i used are for this type of vehicle for replacing the original depth they came with, from the factory speaker
@@phant0m0 these are cheapy speakers that the customer brought in, and are not raised. The issue with these was not the panel, but the window
Right on brother
how do you reinstall ?
@@loicmathieu5254 reverse order
One small part left me perplexed. When the cover of the seal was removed, the white marks on the casing and on the removable "sleeve" didn't align (as apparently they did when it was assembled before), but when they were put back together they now seemed to align. Since the cam has a notch that forces them to mate in a particular way, how did the marks come to align when they didn't before? Did the cam move?
@@workingTchr cam shouldn’t move freely. It’s been awhile since i did this, so i don’t recall. The cover i believe only goes in one way. I think the same thing happened to me.
@@raiderman28 Thanks. I just saw 7 years! Great video. I'm sure I'll get through it ok.
Thank you! I’ve got the ax-toycam2-6v for my 2011 Avalon. The instructions are very inadequate. The way you connected it is the only thing that made sense. That you for confirming it.
@@scottmasters6107 yes the instructions are very hard to understand
Hello, How can I change the rear door handle please? Thanks 😊
@@walidhussain6877 i am not sure, i have never taken that section apart. I have heard some of those door handle are a nightmare to replace.
there no fucking videos on how to take the rear passenger window on a 2001 solara convertible fucking pice of shit car
Thanks for this. Needed to get the door panel off on my 2022 Frontier and this was helpful
Appreciate the "volvo only" tip. The "Corteco" brand apparently is the original mfg for volvo. Their price is half of volvos.
@@workingTchr if you can find a quality replacement part, then thats awesome. When a job is alittle tough, i use original only manufacturer parts. If Corteco is like OEM, then that will work
so bad that honda key isnt removable from fob, bought a red replacement from temu and turns out i have to destroy the original jesus flood us again
@@dancearoundtheworld5360 yup
Your step by step process is very much appreciated 🙏 God bless
You can definitely get it from the top and is much easier to replace from above with an extension. Then trying to remove in a tight space from underneath
@@DavidTipton-m7r i have a 6 cylinder. I couldn’t get to it from the top without removing a bunch of stuff. I was able to get it off from underneath.
You can get to it front the top and is much easier from the top with a long extension.
Very simply explained thanks
Which trim?
@@SameerKhan-hd4qc i believe they are all similar ( the trim doesn’t matter)
Thanks for making this video!
@@jakeforcade6449 your welcome
Great tip take pin out of brake pedal The brake pedal drops down just enough to get the rubber stops in now both cruise control, and the brake lights work again I got the part at AutoZone and there were two grommets and I was fortunate enough that they were the right ones to go in both holes. Thank you so much been fixing cars since I was 14 I had a body shop at 18 I fixed wrecked cars did insurance work saved people their deductible. I’m 71 now
Great job man. So helpful! 👏🏽👏🏽😃
Lol get it wet 😂
Thank you so much buddy u saved my bank account. From going to a mechanic
Best video I watched to replace the cable to the interior door handle to open the door from inside the car!!
What do you do when your EGR valve is stuck to the pipe it screwed to and when you turn it it just wants to twist the whole pipe instead of breaking loose even after torch heat on the nut.
@@JeffMitchell365 might have to replace the EGR Valve and the pipe if you can’t separate them.
@@JeffMitchell365 i believe it goes into the upper intake. The nut has to be heated. If you can’t get that nut off the intake, you will have to replace the upper intake complete. Thats sucks
This looks like a royal pain in the ass
Will this keep all the data
no
Great video Raul - thanks 👍
Thanks SO much, Raul!!! I couldn't figure out that door handle switch to take off the panel!
Can you do a video on how to remove the twitters on the dash, I may need to change them soon they sound off!
@@BrothaHerb sorry i don’t do much in tweeter replacements at my shop, mostly window tinting
Thank you. This helped me years ago and again today.
Ditto all the positive comments- thanks! Any tips on how to change my hood hinge? The “ball joints” are pressed into the hinge, and somehow I lost those ball joints. Now, I need to buy the hinge to replace and it looks complicated (taking off the fender, etc)
Damn it was that AC thermal control amp
thank you for this video , it saved me tons of frustration on replacing these stupid little pads! you are a godsend
I didn’t get notifications and calling alerts when wrist detection is on If I do off wrist detection then all things work fine Why it is And I did all these things but didn’t get solution
my watch sometime acts weird and i can't even change the settings. i usually let it die, charge it back up and everything starts to work. also make sure your watch is not in theater mode. obviously some fixes don't fix everyone's issue, especially if the watch is old and acting weird like mines. i have turned off my wrist detection and it still acts like its on. if you have the setting raise to wake up on , then it will still detect your wrist. not always does one setting completely stop a function on these apple device. sorry it didn't help you out. i am not a tech. i just stumbled on to this on my own, by trial an error. but i also didn't realize that my phone could have been in theater mode. SMH !!
Thanks for the video
Thanks to you, I'm going for it. i have everything just need a new plastic case
I have the same stereo, the problem with mine is that it has 2 small plastic gears broken, one brown and the other black.
Thank you Mazda dealer left the small soeaker unplugged with cable dangling behind the door The also managed to scratch the inside of the door opening it Fixed it with your video 🙏
Is it normal for the clutch to cut off like that? greetings from Mexico
@@omarulisesrodriguezbaldera7300 if it is cutting in and out. Then usually your low on refrigerant
@@omarulisesrodriguezbaldera7300 but if the air is cutting out cold then hot, you might have a bad compressor
Hey there, I was replacing my control arms and while I was wrestling the control arm out I think I accidentally dislocated my driveshaft. What are some ways to tell if I did or not, and if I did how would I go about getting it back in? The boot is still intact
@@nikomunoz5167 if you try to spin the drive shaft, it should not spin freely. If it spins real easily then the axle probably popped off the transmission. You can usually try to pop it back in. Make sure it goes in the gears, then slowly tap it with a small sledgehammer. You might want to look carefully where it goes in to make sure it popped out.
Thank you so much. The mechanic was telling me we gotta replace the whole front of the truck 😂
Do you think that the ready set of speakers from the Mazda 3 BK will fit the Mazda 3 BL? because most of the sets are for BK, and it seems to me that the screw holes are identical, but I'm not 100% sure
@@karolpiechowski5380 they may fit, but if those are some sort of upgraded speaker, or premium speaker, i would not put them in. They usually run off of a factory upgraded amplifier that probably crosses over the frequencies. So its not the same type of full range speaker.
How do u bypass the relay?
@@ismaelpereda6639 i don’t think you can, because of the neutral safety switch.
@@ismaelpereda6639 my neutral safety switch ended up going out later. I think that was why this was blowing fuses. I had to replace it. The wiring had partially melted. I have a video on how to replace that also.
Which wire is positive and which is negative on the passenger side?
@@HhhGggg-rz7bu yiu have to test them with a test light. Year and models, colors of wire might change.
I need a new bulb.. preferably led.. mines still work but starts out being off until I give it a good tap knocking on it then it lights up again.
@@s0meGuyMarlyMar could be just the filament that is sometimes touching. Bulb needs replacement. I listed the LED bulb i used. I listed the bulb type. Doesn’t have to be the same bulb i used, just same type
Good Job Amigo Thank You For Taking Your Time To Made The Vídeo I Love it👍🏼
Thanks for this video. I had no air coming out of the vents when driving or parked. It was a bad solenoid. I replaced the solenoid and everything works as it should! 1998 Volvo S90 245,000 miles and everything still works! Runs and drives better than most cars with a 100,000 miles. These cars are built well!!
@@swright2346 sweet!!!
@@raiderman28 Thanks again!
What you heard rattling was very likely the individual ball bearings from the bearing in the distributor. When they come apart, it allows the cam sensor signal plate to wobble as well as play up and down which actually can bend the thin metal signal plate if it contacts the pickup for it, setting the P1336 crank sensor cog damage dtc, and of course the ecm doesn't know when to open the injectors or fire the coil which is the stumble we feel.
@@arman757 were you responding to someone who commented? Or were you mentioning this to me? My distributor is brand new. My crankshaft sensor failed twice ( shitty autozone parts). Ended up getting one at nissan. No more issues. Costed way more!!’ Alot more
Does anyone know where I can buy a replacement for this specific door handle? My current door handle is peeling and I want to replace it, but I can’t find the part anywhere 😢
@@Rose-dy1xi probably only at the dealership. The vehicle is too new.
any difficulty reattaching the panel?
Not at all. nissan's are a few of the easiest to remove and reinstall